&

PRODUCTS

Recommended products

Your current location: ProductsDrain ValveThermostatic Bellows Steam Trap

STF-C Thermostatic Bellows Steam Trap

Product overview

Product model: STF-C
Nominal diameter: DN15~100mm
Nominal pressure: PN0.05-1.6MPa
Main material: forged steel, stainless steel, titanium alloy steel, chromium molybdenum steel, low temperature steel
Drive mode: manual
Design specification: GB/T 9093
Structure length: GB/T 12250
Threaded connection: ISO 228
Flanged connection: JB/T 79,GB 9113,ANSI B16.34
Test and inspection: GB/T 13927

STF-C Thermostatic Bellows Steam Trap product details

Structural characteristics of STF-C Thermostatic Bellows Steam Trap

1, the drainage temperature can be adjusted between 70-100 degrees, easy to use.
2, to prevent the discharge of high temperature condensate water, to maintain the steam pipeline heat.
3, continuous emissions, no noise. Small fluctuations in steam pressure have no effect on use.
4, simple structure, easy installation, free.
5, by increasing the diameter of the corrugated pipe to increase the amount of condensate arrangement.
6, with good emptying performance, not afraid of freezing. Zero leakage, back pressure rate of 75% or more.

STF-C Thermostatic Bellows Steam Trap main technical parameters

Product number	Nominal diameter	Connection method	use pressure	The maximum allowable temperature	Dimensions				reference weight
Product number	Nominal diameter	Connection method	use pressure	The maximum allowable temperature	L	H1	H2	W	reference weight
YSF-A	15-20 25	Thread	0.05-1.6	220	125 130			45 48	1.2
YSF-A	32-50	Thread	0.05-1.6	220	150			55 64 73	2
YSF-B	15-25	Flange	0.05-1.6	220	140			95 105 115	3.4
YSF-B	32-50	Flange	0.05-1.6	220	160			135 145 160	6.5
YTF-A-16C	15-20 25	Thread	0.05-1.6	220	155	40	75	45	1.6
YTF-A-16C	32-50	Thread	0.05-1.6	220	195	55	100	78	3.4
STF-B-16C	15-20 25	Thread	0.05-1.6	220	95 105	110	30	55	2.8
STF-B-16C	32-40 50	Thread	0.05-1.6	220	110 120	155	40	60	4.2
STF-C-16C	15-20 25 32-50	Flange	0.05-1.6	220	150 160 230	180	50	55 120	5 13
STF-C-16C	65-80 100	Flange	0.05-1.6	220	360 310	210	70	150	26

STF-C Thermostatic Bellows Steam Trap drainage

Model / Size	Steam trap working pressure (△ t) .kg / cm2
CS14 / STB / STC	0.5	1	2	4	6	8	10	12	16
△ t35	500	780	800	900	950	980	1000	1050	1100
△ t25	300	400	460	500	540	700	780	800	860
△ t15	180	200	250	280	310	350	400	450	520

Note:
1, △ t for the difference between the discharge temperature and saturated condensate temperature, the temperature (△ t) increases, the displacement increases.
2, the valve factory hydrophobic temperature has been adjusted at 95 or so, if you want to change the hydrophobic temperature or displacement, the valve can be adjusted to rotate the top of the screw. Turn the spool clockwise to reduce the amount of hydrophobic and reduce the hydrophobic temperature. When the valve is rotated counterclockwise and the spool is retracted, the hydrophobic amount increases and the hydrophobic temperature increases. Tighten the lock nut after adjustment.
3, the pressure difference is the pressure difference between the inlet and outlet of the trap, displacement refers to the amount of steam condensate discharged continuously in a unit hour.

Reminder:

All text, data and pictures in this article are for reference only.To see more details of the STF-C Thermostatic Bellows Steam Trap performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

Next：Adjustable Bimetal Trap

Previous：Thermostatic Diaphragm Box